Zhejiang Ligao Insulation Material Co., Ltd.
Acrylic glass fiber hose
Heat -resistant level: F
Continuous work temperature: from -30 ° C to+155 ° C, the highest temperature+180 ° C (hours)
Speed voltage: 1.5kV to 4KV
Flame retardant: film combustion, glass fiber is not burning
High mechanical strength
Flexible
Good compatibility with insulation and immersion paint
Standard color: transparent, black; the rest of the color: customized
Inquire Now
The acrylic glass fiber hose is a F -level insulation hose that is woven a pipe of alkaline -free glass fiber and coated with acrylic lotion by heating and drying. It has good dielectric performance, excellent softness, and benzene resistance. It is suitable for wiring insulation and mechanical protection of motors, electrical appliances, instruments, radio, household appliances and other devices.
Acrylic vinegar glass fiber paint tubes are woven into pipes without alkaline glass fiber, and the B -level insulation paint tube made of acrylic latex is heated and dried. It has reliable heat resistance, good electrical properties, good softness and elasticity, as well as phenylene oil -resistant and other characteristics. It is suitable for wiring insulation and mechanical protection of motors, electrical appliances, instruments, radio, household appliances and other devices. Level: 1000+20-10 mm (the continuous length is agreement by the supply and demand)
Appearance: smooth surface and neat end.
elasticity:
1. In the condition of 205C and 655%of the relative humidity, the paint tube should not be removed or cracking with the glass tube after burning for 1 hour on the specified rod diameter.
2. After 2 hours of treatment under the temperature -10 ~ -15c, immediately burn it on the prescribed rod diameter. The paint film should not be taken off or produced by a rotten coconut. She was a babble house.
3. After 1302C is treated for 24 hours, it is used to burn at the temperature of 202C at room temperature. The outer paint film should not be removed or cracking with the glass fiber tube.
Oil resistance: The paint tube is immersed in the transformer oil of 105 soil 2c for 24 hours. The paint film should not be removed or cracking with the glass wire tube, allowing the paint color to become darker.
Benzene resistance: For 4 hours in the warm toluene liquid of the paint tube, the paint film does not post or fall off.
Note: 1. II type softness is better than type I. After 150C for more than 60 minutes, the electrical properties can reach Type I
2. The lacquered tube breakdown voltage of 1.5 mm and below of the inner diameter must not be lower than the specified value of 70%.
Color and packaging:
standard packaging:
-Onched diameter 0.5 to 4mm: 200 meters: 200 meters
-The inner diameter 5 to 20mm: 100 meters
-The inner diameter 22 to 24mm: 50 meters
-The inner diameter 26 to 30mm: 25 meters
Box box specification: 33 × 33 × 57 cm; 40 × 40 × 60cm
Inner diameter (mm) | tolerance (mm) | Wall thick (mm) | ||||||
Bidirectional （±） | unidirectional （+） | 4KV | 2.5KV | 1.5KV | ||||
Min. | Max. | Min. | Max. | Min. | Max. | |||
0.30 0.50 0.80 1.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00 8.00 10.00 12.00 16.00 20.00 25.00 | 0.10 0.10 0.10 0.15 0.15 0.20 0.20 0.25 0.25 0.25 0.25 0.50 0.50 0.50 0.50 0.50 0.50 | 0.20 0.20 0.20 0.30 0.30 0.40 0.40 0.50 0.50 0.50 0.50 1.00 1.00 1.00 1.00 1.00 1.00 | 0.25 0.25 0.25 0.25 0.35 0.35 0.40 0.40 0.50 0.50 0.50 0.50 0.65 0.65 0.65 0.65 0.65 | 0.50 0.50 0.50 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.20 1.20 | 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.40 | 0.50 0.50 0.50 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.90 0.90 0.90 0.90 0.90 | 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.40 0.40 0.40 0.40 0.40 | 0.45 0.45 0.45 0.55 0.55 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.75 0.75 0.75 0.75 0.75 |